LEDFlood-E Re150-10W-3000k BLK
Colour of light | White |
---|---|
Colour temperature | 3000 K |
Energy efficiency class of the built-in lamp | A++, A+, A (LED) |
Lamp holder | None |
Luminous flux | - lm |
Max. system power | 10 W |
Type of control gear | LED operating device current-controlled |
Adjustability | Swivelling |
Beam angle | Extreme wide beam >80° |
Built-in diameter | - mm |
Built-in height/depth | - mm |
Built-in length | - mm |
Built-in width | - mm |
Colour housing | - |
Control gear included | Yes |
Degree of protection (IP) | IP65 |
Dimming 0-10 V | false |
Dimming 1-10 V | false |
Dimming DALI | false |
Dimming DMX | false |
Dimming DSI | false |
Dimming GPRS | false |
Dimming LineSwitch | false |
Dimming RF | false |
Dimming Sine Wave Reduction | false |
Dimming Touch and Dim | false |
Dimming Zigbee | false |
Dimming depending on control gear | false |
Dimming mains voltage modulation | false |
Dimming manufacturer's proprietary system | false |
Dimming phase cut-off | false |
Dimming phase cut-on | false |
Dimming potentiometer (integrated) | false |
Dimming programmable | false |
Dimming with push-button | false |
Fit for monitor workplace acc. EN 12464-1 | - |
Height/depth | 45 mm |
Impact strength | IK08 |
Lamp type | LED not exchangeable |
Length | 150 mm |
Light distributor | Diffuser lens/optic/panel |
Light outlet | Direct |
Light sharing | Symmetric |
Luminous intensity | - cd |
Material cover | - |
Material housing | - |
Nominal voltage | 220...240 V |
Outer diameter | - mm |
Photobiological safety according to EN 62471 | - |
Protection class | I |
Rated luminous flux acc. IEC 62722-2-1 | 800 lm |
Reflector | None |
Surface brushed | - |
Surface protection | - |
Voltage type | AC/DC |
Width | 130 mm |
With light sensor | false |
With light source | Yes |
With movement sensor | false |
Colour consistency (McAdam ellipse) | - |
Colour rendering index CRI | 80-89 |
Conductor cross section | - mm² |
Connectable conductor cross section | - mm² |
Connection type | - |
Covering of the luminaire with thermally insulating material possible | - |
Degree of protection (NEMA) | - |
Energy efficiency class of the provided exchangeable built-in lamp | - |
Filament test according to IEC 60695-2-11 | - |
Highest energy efficiency class of the exchangeable lamp | - |
LED nominal current at constant current | - mA |
Lamp efficacy | - lm/W |
Lowest energy efficiency class of the exchangeable lamp | - |
Luminaire efficacy | 80 lm/W |
Luminaire with limited surface temperature, sign "D“ | false |
No dim function | Yes |
Number of poles | - |
Power factor | 0,9 |
Power supply energy efficiency index (EEI) | - |
Rated ambient temperature acc. IEC62722-2-1 | - °C |
Rated life time L70/B10 at 25 °C | - h |
Rated life time L70/B50 at 25 °C | - h |
Rated life time L80/B10 at 25 °C | - h |
Rated life time L80/B50 at 25 °C | - h |
Rated life time L90/B10 at 25 °C | - h |
Rated life time L90/B50 at 25 °C | - h |
Suitable for built-in mounting | false |
Suitable for ceiling mounting | Yes |
Suitable for clamp-mounting | false |
Suitable for lamp power | - W |
Suitable for light-track mounting | false |
Suitable for low voltage cable system | false |
Suitable for number of lamps | - |
Suitable for pedestal/floor mounting | Yes |
Suitable for surface mounting | Yes |
Suitable for suspended mounting | Yes |
Suitable for traverse mounting | false |
Suitable for wall mounting | Yes |
Total harmonic distortion | - |
Type of wiring | - |